Nitro Beast

Nitro Beast 2020 Review

The Nitro Beast is a very full on board, super stiff, traditional camber, that would be a top choice if you want to ride the biggest jumps, and charge everywhere. You would want to be a pretty aggressive rider to get the most out of this one.

[tabs type=”tabs”]

[tab title=”Description” active=”true”]

Features of the Nitro Beast

  • Twin Shape
    Exactly the same shape no matter if you are riding it regular, or switch.
  • True Camber
    The classic, traditional camber profile that can’t be beaten. The best pop, edge hold and stability at high speed.
  • Park Flex
    Although there are a few Nitro boards that are listed as having a Park Flex, the Beast is rated as an 8/10, though seems even softer than what I felt when riding it.
  • Radial Sidecut
    A simple classic sidecut, made from one radius circle.
  • Whiplash Core Profile
    The profile of the core means that it is thinner between the inserts (between your feet), with extra thickness outside your feet, for lots of pop, but still letting you flex the board.
  • Sintered Speed Formula II Base
    This is the base that Nitro use on their high end boards, which is a sintered material that is already infused with wax to give it a fast ride in all snow conditions.
  • Railkiller Edge
    Twice as thick as regular edges, more steel means they can take bigger impacts on rails than normal boards.
  • Ballistic Impact Panels
    Kevlar panels are used around the bindings to help protect the board from big impacts and hard landings.
  • Tri-Lite Laminates
    Three directions of fibers, which means you get a responsive flex, both longways and torsionally.
  • Diamond Band
    The Diamond Bands run lengthways down the board, that are made from strong but lightweight carbon.
  • Powercore II
    Made up of mainly poplar wood, with beech stringers to add extra strength.

How it Rides

Board size: 155cm

Boots: Salomon Launch Boa SJ

Bindings: Salomon Brigade

This review is based on me riding the 2020 model, with my standard boots and bindings setup, which I was riding with positive 12 degrees on the front foot, and negative 9 on the back.

Camber Profile

Classic traditional camber, combined with a radial sidecut gave me a very predictable ride, very similar to the boards I learnt to ride on. No little rocker sections, just plain old camber to the contact points. Like you would expect, it has super good edge hold, as well as being (almost) the most stable board that I have ridden.

Flex and Pop

Although Nitro give the Beast a flex rating of 8/10, I don’t really know how it could be any stiffer. If you put in the effort to load up the tail, the pop is huge.

Edge Hold

Combining the radial sidecut, with traditional camber gives the Beast edge hold you can’t really beat. Riding as fast as possible into sketchy turns is no problem at all, the edges just drive into the snow without effort.


I had just given it a fresh wax, and the sintered base was nice and fast even in warm slushy Australian conditions. Late in the day, as big moguls turn up, you normally start to get thrown around a bit, but not on the Beast. Almost like the chopped up runs weren’t there, it tears through everything with ease, making it way easier on your legs than any softer boards.


  • Classic camber feel
  • Stable at any speed
  • Huge pop


  • Mega stiff, too much for me


Overall, it completely lives up to its name. I can easily see how it is the sort of board that pros can be doing triples on, it has the flex and design to handle the biggest landings. Although technically I fit within the weight range for the 155cm (I’m 155lbs/70kg), maybe the smaller 151 would be better. Keep in mind that it has tiny waist widths, so if you have even size 10+ boots you are probably best at looking at the Mid-Wide 157cm model, with its 254mm waist.

If I only wanted to ride as fast as possible, then it is the board that I know can smash through anything with minimal effort, but I don’t ride that aggressively enough to justify it.

[tab title=”Technical Specs”]

Nitro Beast Technical Specs

Length Running Length (cm) Waist Width (mm) Nose/Tail Width (mm) Sidecut (m) Setback (cm) Weight Range (lbs) Weight Range (kg)
151 111 241 284 7.5 0 110-155 50-70
155 115 247 290 8.0 0 120-165 55-75
157 116 254 298 8.1 0 145-185 65-85
158 117 250 294 8.2 0 130-175 60-80


[tab title=”Previous Season Graphics”]

[column md=”6″]

nitro beast volcom 2019

2019 Volcom Model

[column md=”6″]

nitro beast 2018






Find the best price on the Nitro Beast

Find the Nitro Beast

Leave a Comment

2 thoughts on “Nitro Beast”

  1. Hey I have been looking at getting a camber Nitro board, and have narrowed it down to the Beast or the Team. I like to ride park, a mix of jumps and rails, but don’t know which one to get. I’m 5’9 and about 165lbs


    • I would go for the Nitro Team, probably in the 155cm. You still get regular camber, and a mediumish flex, but it isn’t as full on as the Beast. If you were heavier or only wanted to ride really big features, then the Beast could be a good option, but for your weight you will get the most out of the Team.