The Capita Black Snowboard of Death 2017 is an all terrain board, that floats in powder and has a medium flex rating.
Features of the Capita Black Snowboard of Death
- Mountain Profile
This profile has camber through the middle of the board, with a flat tail and reverse camber on the nose. The camber section is made to give you pop and stability when you ride on hardpacked snow, while the reverse camber nose gives you better float in deep snow.
- Hover Core
The core is made to be light, which is made up of a combination of thin Paulownia strips, that are combined with 7mm Poplar beams. The combination makes a light and strong core that is still damp.
- Urethane Topsheet Anchor
Capitas description “This thin layer ofURETHANE placed between more rigid materials allow the board to flex without the risk of failure during impact.”
- Nano-Carbon Forks
- Blended Radial Sidecut
There is a single radius arc through the middle of the board, that changes to a blend zone at the contact points of the board.
- Dynaweave Fiberglass Bi-Resin
- Nano-Carbon Race Base
The highest end base Capita have.
- Multitech Level 5 DeepSpace Metallic Silkscreen
- PAM16000 Topsheet
- Multitech Sublimation
- Die Cut Base
A die cut base is made up of different sections of base material, that fit together like a puzzle, and make sharp and clear base graphics.
- PLT Topsheet Technology
Basically this means that the fiberglass texture or pattern doesn’t show through on the topsheet, which lets them keep it smooth and shiny.
- 360 Degree Steel Edges
This just means that the edges run the whole way around the board.
- Full ABS Sidewalls
- Titanal Base Inlay
The metal Capita logo that is inset into the base of the board.
|Length||Effective Edge||Waist||Nose/Tail||Taper||Sidecut||Max Stance|