The Burton Blunt is a forgiving snowboard, with a medium/soft flex and a twin shape.
Features of the Burton Blunt
- Flying V
The Flying V is a combination of reverse and regular camber sections, made to get a nice balance between the two. There is a rocker section in the middle of the board (between your feet), which changes out to camber under your feet, then rocker towards the tip and tail. Overall it has a rocker shape, which helps to keep it loose and forgiving, and helping it float in deep snow. The camber sections help with the edge hold, and to give the board more pop.
- Twin Shape
The board is symmetrical, so it doesn’t matter if you are riding it regular or switch, it will ride exactly the same. Good for park and freestyle boards where you will be taking off or landing switch.
- Twin Flex
Most twin shaped boards have a twin flex, which just means that the board will flex the same in both regular and switch.
- FSC Certified Super Fly 800G Core
The core is made up of a combination of hard and soft woods, which are made to keep the weight down, but still be strong and responsive.
- Dualzone EGD
- Sintered Base
The sintered base is strong and fast, and does a good job at soaking up wax.
- Biax Fiberglass
Biax fiberglass gives a easy to ride feel, that is torsionally soft.
- Frostbite Edges
These edges extend out slightly under your feet, that gives you extra edge hold and grip when you are riding in icy conditions.
- Squeezebox Low
- The Channel
The Channel works best with Burton EST bindings, which give you an almost unlimited amount of stance widths and angles. Now you can fit almost any brand of bindings on to Channel boards.
The scoop on the tip and tail keep the board loose and playful.
The nose and tail of the board are thinner, so there is less weight.
- Infinite Ride
The board comes already broken in, so it will keep the same feeling all season.
- 156cm Wide
- 159cm Wide
- 163cm Wide
|Effective Edge (mm)||1115||1140||1180||1200||1210||1230||1270|
|Tip Width (mm)||285.9||288.7||292.2||300||295.3||303||306.6|
|Waist Width (mm)||246||248||250||257||252||259||261|
|Tail Width (mm)||285.9||288.7||292.2||300||295.3||303||306.6|
|Sidecut Radius (m)||7.2||7.3||7.6||7.7||7.8||7.9||8.2|
|Stance Setback (mm)||0||0||0||0||0||0||0|
|Stance Range (mm)||505||530||560||560||560||560||560|
|Rider Weight (lbs)||110 – 150||115 – 155||130 – 170||135 – 175||135 – 175||145 – 185||165 – 205|