Rome Buckshot 2017
The Rome Buckshot is a mid range regular camber, twin park snowboard.
Features of the Rome Buckshot
- Stay Positive Camber
Regular, traditional old school camber. It gives you the best pop, solid edge hold and a stable ride.
There is a single rod in the center of the board, that is made to help add pop, but still letting the board flex naturally.
- Rebound Sidewalls
These sidewalls are more elastic that regular sidewalls, so that they can take a bigger hits from park riding with out being damaged.
- Pop Core Matrix
A balance of strength, lightness and performance it has two zones of low density wood.
- StraightBiax Carbon Laminate
There are two directions of fibers, as well as carbon strips that run down the length of the board to help add some pop.
- SinterTrue Base
Rome’s mid level base, it has the performace of a sintered base, which is good wax absorbtion and fast speeds.
- Skatecore Profiling
The core of the board is thinner between the bindings, and then thicker under the bindings out towards the tip and tail. It is made to get coser to a skateboard feel.
- Basalt Impact Plates
The Basalt Impact plates site under the bindings and help protect the board from core compressions.
- Impact Edges
- True Twin
A symmetrical design, so riding or landing switch is going to ride just the same as riding regular.
Rome Buckshot 2017 Specs
|Insert Pattern||12 pack B||12 pack A||12 pack A+|
|Design Stance (in/cm)||20″ / 51 cm||21″ / 53 cm||22″ / 56 cm|
|Stance Range (in)||18 1/2-23 1/4||19 1/2-24 1/4||20 1/2-25 1/4|
|Stance Range (cm)||47.0-59.0||49.5-61.5||52-64|
|Design Stance Location||centered||centered||centered|
|Camber Type||Stay Positive||Stay Positive||Stay Positive|