The Oakley Division Insulated jacket is made to give you a ton of warmth and weather protection, without being a huge puffy jacket.
Features in the Oakley Division Insulated jacket
- Hydrogauge 10 laminates
- 10,000mm Waterproof rating
A solid waterproof rating, which will keep you dry even if the snow is very wet.
- 10,000gm Breathability rating
Like the waterproofing, the breathability rating of the fabric is decent. Enough that the material will still breath, without making you hot and stuffy.
- 80g Thinsulate insulation in body
A heavier (warmer) amount of insulation through the body of the jacket.
- 60g Thinsulate insulation in sleeves
A slightly lighter amount of insulation in the arms of the jacket.
- Critical seams are taped
The main seams of the jacket are taped, so that moisture can’t get inside through those seams.
- Regular fit
A middle of the range fit, not super baggy or super slim. There is enough room to add extra layers underneath if it is very cold weather.
- Underarm vents
If the weather gets warmer, or you are out hiking, you can open up the underarm vents to get rid of extra heat.
- Powder skirt
You can connect the powder skirt together to make a nice tight seal around your pants. It will stop snow from getting up and inside the jacket.
- 1 year warranty
|Taped Seams||Critical Seams Taped|
|Material||Hydrogauge 10 2-Layer|
|Insulation||80g Polyester/40g Polyester|